"Today, if you do not want to disappoint, Check price before the Price Up.Ar-15 30rd Tactical Magazine 223/5.56 Brownells You will not regret if check price." bargain Ar-15 30rd Tactical Magazine 223/5.56 Brownells
Ar-15 30rd Tactical Magazine 223/5.56 Brownells.
Our Ultra-Reliable Magazine With Popular Aftermarket Accessories Pre-Installed
These curved 30-round model comes with the Magpul Self-Leveling Follower. This follower won’t tilt as rounds are fed into or stripped from the magazine, and its self-lubricating polymer composition helps ensure smooth movement in the mag body for easier loading and ultra-smooth feeding.
AR-15, Issue:11, Page:059
Big Book Catalog, Issue:71, Page:066
SPECS: Aluminum body, hard-anodized, dry-lube coating. Dry-lube coated chrome silicon spring. Teflon-reinforced plastic follower. Available in Military Gray.
Ar-15 300 Blk Pmag 30 Gen M3 Magazine Magpul.
The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in .300 Blackout.
Since its inception, .300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its performance and compatibility.
One of the nice features of .300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so.
Due to the wide variety of projectile weights and shapes potentially decreasing overall reliability, a dedicated .300 Blackout magazine was a logical step for the PMAG line.
In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your .300 BLK rifle. When using 5.56 mags, the potential to chamber and fire a .300 BLK round in a 5.56 rifle with catastrophic results requires diligent ammunition management by the shooter.
The PMAG 30 AR 300 B’s distinct rib design provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues.
Along with optimized .300 BLK performance, the PMAG 30 AR 300 B brings along all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover.
- Dedicated, purpose-designed magazine for rifles chambered in .300 Blackout
- Optimized internal geometry accommodates the wide variety of bullet profiles used in .300 Blackout cartridges
- Distinct rib design provides the shooter a visual & tactile difference from any other PMAGs to mitigate dangerous cross-loading
- Carries forward the physical & performance features of the rest of the Gen M3 line
Big Book Catalog, Issue:71, Page:067
Steel Case Ammo 223 Remington 55gr Fmj Tulammo Usa.
In the fields, at the range or on the hunt, you can trust TulaAmmo to deliver a superior level of internal, external, and terminal ballistics, more consistent velocities and impressive retained energies downrange from your favorite rifle, with an unmatched value-to-performance ratio. All TulaAmmo rifle cartridges are steel cased, non-corrosive Berdan primed, with a phosphate coating and a lead core.
Shooting Accuracy- more uniform and consistent jacket delivers up to 15% better shooting accuracy than standard bimetal bullets.
Corrosion Resistance- Zinc washed cases doesn't change in appearance over time and is proven to inhibit electrochemical corrosion of the steel case.
You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition. All ammunition must be shipped Domestic Ground. Shipping not available for International residents. Residents in CA, DC, DE, IL, MA, NY, CT, NJ and OH may have additional restrictions. Always make sure you use the correct ammunition for your firearms. Check your state and local laws for any other applicable firearms and ammunition regulations. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering. View full restrictions here.
Ammunition pricing is per box. ATTENTION – California Customers
Brownells is still shipping ammunition orders to California but the process has changed to comply with California Proposition 63. We must now ship ammunition purchased online to an FFL or California-approved ammunition dealer. After placing your order, a Brownells representative will contact you to ensure your ammunition arrives quickly and in compliance with the law.
Ar-15 Atlas S-One Slim Line Handguards Free Float M-Lok Aero Precision.
Not Your Average Handguard
The AR-15 ATLAS S-ONE M-LOK free-floating slim line handguards are machined from 6061-T6 aluminum, and have been designed with size and weight in mind, to provide a premium handguard solution for lightweight MSR builds. The handguards have a slim profile, but maintain the strength and stability shooters require, and have come to expect from Aero Precision handguards.
The AR-15 ATLAS S-ONE slim line handguards use the new Aero Taper Lock Attachment System (ATLAS), which is both functional and pleasing to look at. It uses two mirrored tapered locking nuts that allow for even clamping pressure to be distributed across a custom barrel nut with a turnbuckle screw.
- Length – 7”, 12" and 15"
- Available in Black and FDE
- Front and rear picatinny rail
- Reduced weight by eliminating center of top rail
- Indexing grooves in 12 o’clock position for positive grip control
- 1.3” I.D. – 1.5” O.D.
The AR-15 ATLAS S-ONE slim line handguards include all required mounting hardware.
P320/p250 Magazines Sig Sauer.
Sig Sauer P250 and P320 factory replacement magazines are available in all the calibers and capacities that the pistols come in. Sometimes the quickest way to solve a problem with feeding or cycling is to make sure you are using only original factory magazines in your Sig Sauer P250 and P320 pistol.
All Sig Sauer P250 and P320 factory replacement magazines have a hardened steel mag body with a durable satin black finish, plus a black polymer follower and removable base plate. Extended capacity P250 and P320 magazines have a longer base pad that protrudes below the grip of the pistol when seated in the magwell.
Big Book Catalog, Issue:68, Page:564
Big Book Catalog, Issue:68, Page:662
Weapons Care System Pellets Vfg.
Absorbent Felt Pellets Quickly Scrub Barrels Clean
Innovative and efficient system cleans rifle and handgun barrels with a minimum of effort and mess. Slip two felt pellets on the cleaning rod adapter, apply your favorite solvent and push through the bore to rapidly scrub out dirt and fouling. Pellets fit snugly to easily follow the rifling for fast, efficient cleaning; as you withdraw the rod, the front pellet falls off while the rear pellet polishes the bore. Lets you apply oil, cleaning solvents, J-B® Bore Cleaner or Moly Bore Paste easily with minimal mess. Plain pellets are made from a highly absorbent, hardened felt; Super Intensive pellets also have interwoven brass fibers for even greater scrubbing action to quickly clean heavily fouled barrels. All require cleaning rod adapter.
1911, Issue:04, Page:058
Big Book Catalog, Issue:71, Page:337
Ar-15 Usasoc Upper Receiver Group Improved (urgi) 5.56 M-Lok Geissele Automatics Llc.
Build Your Rifle on the Upper Receiver Used By USASOC - A Clone (Almost!)
The Geissele URGI AR-15 upper receiver is a near clone of the "Upper Receiver Group Improved" currently going into service with USASOC (United States Army Special Operations Command). It offers a host of improvements over the standard "mil-spec" M4 upper we’ve grown so accustomed to - and it will transform your AR-15 shooting experience. Brownells offers the Geissele URGI upper in "Stripped" form and a Complete model ready to snap onto the lower of your choice and hit the range. Let’s look at the Complete URGI first.
To begin, Geissele installs a 14.5" Daniel Defense barrel optimized to handle the full rigors of the new M855A1 (AB57) ammunition, with a Surefire SF4P four-prong flash hider pinned up front. Functioning as a highly effective flash suppressor, the URGI’s SF4P four-prong flash hider also serves as a rock-solid adapter for a Surefire SOCOM 5.56 Fast-Attach sound suppressor (not included). In between, a mid-length gas system with low-profile gas block ensures more reliable cycling than a standard carbine-length tube.
Each URGI is fitted with the handguard Geissele designed specifically for USASOC, the MK 16 M-LOK™ Super Modular Rail handguard with a full-length Picatinny top rail and lotsa slots for other accessories. T-markings are engraved on the rail but not painted white to help keep the rifle unobtrusive. The URGI Upper Receiver is also outfitted with Geissele’s ambidextrous Airborne Charging Handle, with easy-to-grasp levers that are deeply checkered to ensure a confident grip when you need to charge the chamber in a hurry.
Complete URGI upper receiver feature summary:
- Core receiver with forward assist, shell deflector & ejection port cover
- Daniel Defense 14.5" barrel with 1-7" rifling & 1/2"-28 tpi muzzle threads
- Mid-length gas system with low-profile, stainless steel, Nitrided gas block (pinned)
- Geissele MK 16 Super Modular Handguard
- Pinned-and-welded Surefire SF4P four-prong flash hider
- Geissele Airborne Charging Handle
- Mil-spec M4 carbine bolt/carrier group
NFA DISCLAIMER/WARNING: The Complete URGI upper receiver contains a permanently pinned and welded muzzle device. This makes the muzzle device an integral part of the barrel to make the barrel meet the 16" minimum length requirement, and requires no registration or tax stamp from the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE). Removal or modification to the muzzle device, will result in converting this item to a regulated item by the National Firearms Act (NFA). Additional state and local restrictions may apply. It is the sole responsibility of the buyer to comply with any and all applicable laws.
Big Book Catalog, Issue:71, Page:005
Ar-15 Lower Parts Kit Geissele Automatics Llc.
Necessary Internal Components To Repair / Build / Rebuild a Custom Rifle
The Geissele AR-15 Lower Parts Kit contains all 17 parts necessary to get your lower receiver operational - minus the trigger and pistol grip. Geissele is renowned for superbly designed, meticulously manufactured products, and these parts meet their high standards. Items in the AR-15 Lower Parts Kit are manufactured to "mil-spec" (M16 / M4) dimensions to ensure optimum fit and function in your AR rifle or carbine.
The Geissele AR-15 Lower Parts Kit includes:
- Bolt catch
- Bolt catch plunger / spring / roll pin
- Mag release
- Mag release button
- Mag release spring
- Buffer retainer spring
- Buffer retainer
- Safety detent & spring
- Triggerguard & roll pin
- Takedown detents & springs
- Pivot / takedown pins
The fire control system - trigger, hammer, disconnector (and pins) - may be the most "personal" part of any custom AR-15. Along with the pistol grip, it’s the area most customizers and custom builders prefer to select very carefully. As a result Geissele omits both components from this AR-15 Lower Parts Kit so you don’t have to spend money on parts you won’t use!
Big Book Catalog, Issue:71, Page:043