Hodgdon Powder Varget Hodgdon Powder Co., Inc..
Hodgdon Powder offers one of the largest selections of quality smokeless propellants for rifle reloading. These powders are very popular with high power and long-range shooters, varmint hunters, and benchrest shooters.
Hodgdon's exclusive line of extruded rifle powders was developed to give shooters consistent performance load after load, in ever the most extreme heat and cold.
Outstanding performance and velocity for 223 Rem, 22-250 Remington, 308 Winchester, 30-06, 375 H and H and many more. Varget is a favorite with varmint hunters and high power shooters.
Big Book Catalog, Issue:68, Page:544
Sinclair, Issue:5B, Page:095
Impact Sport Electronic Earmuffs Howard Leight.
Protects Hearing, Amplifies Conversation & Range Commands
The Howard Leigh Impact Sport Electronic Earmuffs offer compact, lightweight electronic hearing protection allowing you to hear conversations and range commands, while blocking out dangerous noises like gunfire. Internal ultra-fast response electronics amplify ambient sounds to a safe 82 decibels (dB), yet shut down when sounds above 82 dB are detected to let the muff’s passive hearing protection take over.
When the earmuffs are in amplification mode, directionally placed stereo microphones even help you hear where the sound is coming from. Built-in AUX input accepts 1/8" (3mm) stereo plug (patch cable included) to connect an MP3 player, radio, or other audio.
The Impact Sport Electronic Earmuffs feature an automatically shut-off that activates after 4 hours to preserve battery life. Bottom half of the low-profile ear cups angles in sharply to ensure plenty of clearance when shouldering long guns. Cups fold up neatly into the adjustable head band for convenient storage.
AR-15, Issue:11, Page:076
Big Book Catalog, Issue:71, Page:357
Sinclair, Issue:5B, Page:224
Co-Ax Reloading Press Forster.
No need to complicate the reloading process, the Forster Co-Ax Press keeps it simple while still delivering famous Forster precision. The Forster Co-Ax Loading Press comes with several unique features that help make it truly one of a kind. The Co-Ax features Snap-in and snap-out die changing. You can actually change from sizer die to seater die in two seconds! A positive spent primer catcher system which passes all spent primers and dirty carbon through a tube and into a container. That helps keep all working parts free of dirt and abrasives. Dual floating guide rods to help ensure perfect alignment.
- Three times the mechanical advantage of an ordinary “C” press.
- Delivers perfect alignment of the die and the case because the shell holder jaws are designed to float with the die.
- Ambidextrous design, no frame support or swinging primer arms to interfere or cause obstructions.
- Unique top priming device ensures primers will be seated straight
- Supplied with “S” jaws. Holds rims from .343” to .422” and .468” to .562”
Big Book Catalog, Issue:68, Page:535
Sinclair, Issue:5B, Page:048
Sinclair, Issue:5B, Page:062
Ar-15 Charging Handle Brownells.
Standard AR-15 charging handle, machined from aluminum. Features a matte black anodized finish.
Big Book Catalog, Issue:71, Page:035
Ar-15/ar 308 Hi-Speed National Match Trigger Set Geissele Automatics Llc.
User-Adjustable, Adaptable Premium Trigger
Geissele’s Hi-Speed National Match AR-15 Trigger combines their exceptional match-grade trigger with their Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets. Geissele’s adjustable Hi-Speed National Match AR-15 Trigger is designed for competition, hunting, and tactical sniper use, where exact trigger pull weight is essential for success.
The trigger comes with three spring sets, each applicable to a different type of shooting. The Hi-Speed Service Spring is designed for NRA High Power Service Rifle competition and is approved for use in CMP sanctioned competitions. Easily switch to the Hi-Speed Designated Marksman Rifle spring set for tactical and military shooting where trigger pull weight is not regulated. Hi-Speed Match spring set can be adjusted to low pull weights for enhanced trigger control, letting the shooter wring every ounce of accuracy out of his rifle
- Service Rifle pull: 3.2-5 lbs. (1st), .5 to 1.5 lbs. (2nd), 4.5 lbs. min. (total)
- DMR pull: 2.5 to 3.6 lbs. (1st), .5 to 1.5 lbs. (2nd), 3 to 5.1 lbs. (total)
- Match Rifle pull: 1.5 to 2.5 lbs. (1st), 8 oz. to 14 oz. (2nd), 1.9 to 3.4 lbs. (total)
With the Geissele Hi-Speed National Match Trigger in your AR-15, you can easily adjust the triggers first and second stage weight, as well as total pull weight and overtravel to your exact preference.
Big Book Catalog, Issue:71, Page:029
Kak Shockwave Pistol Brace Package Kak Industry Llc..
Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.
This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture.
- Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
- Available in black and flat dark earth (this listing is for black)
- Quick and easy to install
- Provides additional support during firing
- Weighs a scant 5.0 ounces
- ATF approved for pistol use
- Veteran designed, engineered, marketed, and sold
- Made in U.S.A.
- Shockwave Blade Pistol Stabilizer
- KAK Shockwave Tube
- Castle Nut
- Mil-Spec Endplate
- Carbine Buffer Spring
- Standard Carbine Buffer
Ar-15 Silent Captured Springs Gen 2 H2 J P Enterprises.
The Gen 2 Drop-in captured-spring recoil system helps your AR function more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks.
The H2 buffer is heavier than the standard spring. The buffer includes two Tungsten weights in addition to one steel weight. Weighing approximately 4.7 oz. Recommended for use in Short-barreled rifles, suppressed firearms, select fire rifles, and piston-operated rifles.
The Auxiliary Spring Rate Kits for the JP Silent Captured Spring allow custom tuning of the device to a given rifle. While the default spring offers the best performance for the widest range of configurations, a simple disassembly and reassembly of the JPSCS with a slightly different spring rate can yield truly optimized performance, particularly for rifles without an adjustable gas block.
Benefits of the Gen 2 Silent Captured Spring include:
New aluminum guide rod cuts overall weight
Heavier masses translate to more buffering mass and chance of bolt bounce
Full correspondence between SCS masses and H1, H2 and H3 buffer
Interchangeable buffers allow conversion between AR-15 and AR-10 models (and vice versa)
Includes spacer to allow for installation in both carbine-length and rifle-length buffer tubes.
Big Book Catalog, Issue:71, Page:034
Sight Pro & Rangemaster Sight Mover Slide Shoes Mgw.
Slide Shoe - Unique clamping shoes are firearm specific. These work with the MGW Sight Pro.
- SP102 fits Glock except G42
- SP103 fits Springfield XD-S
- SP104 fits S&W M&P Shield only
- SP105 fits Colt 1911, Sig 1911, Bersa Thunder, Kimber Ultra Carry II, Springfield EMP 9mm, Para-Ordnance Carry 12
- SP106 fits Sprigfield XD, XDM only
- SP107 fits S&W 3rd Generation 9mm
- SP108 fit FN 9mm/.40 cal(FNP, FNS, FNX) Forty-Nine/FNS-9C/FN509
- SP109 fits Sig Sauer (P220, P225, P226, P228, P229, P239)
- SP110 fits Sig Pro Series
- SP111 fits Beretta 92
- SP112 fits Beretta Cougar/PX4
- SP113 fits HK USP/P2000/P30/P45
- SP114 fits S&W M&P only
- SP115 fits Glock 42 and Glock 43
- SP116 fits Ruger® SR Series®
- SP117 fits Bersa BP Series
- SP118 fits Colt Mustang .380, Kimber Micro Carry .380
- SP119 fits Ruger® LC Series®
- SP120 fits Ruger® P Series™
- SP121 fits CZ-75, Baby Eagle, CZ P09, Sphinx SDP Compact
- SP122 fits Sig Sauer P238
- SP123 fits Sig Sauer P938
- SP124 fits Browning Hi-Power, FEG Hi-Power, Tokarev
- SP125 fits S&W .380 Bodyguards, Kahr P380, Kimber Micro Carry 9
- SP126 fits S&W Sigma
- SP127 fits S&W 3rd Generation .45
- SP128 fits Steyer M40/MPS/M9-A1
- SP129 fits FN .45 Cal(FNP .45, FNS .45, FNX .45)
- SP130 fits Kimber Solo Carry
- SP131 fits Walther P99/PPQ Canik TP9 (Century Arms), Canik Elite
- SP132 fits Kahr P40/CW40/PM9
- SP133 fits Sig Sauer P320, Sig 250
- SP134 fits Sig Sauer P224
- SP135 fits Kahr P45
- SP136 fits HK VP9
- SP137 fits Sig P290 RS
- SP138 fits Grand Power P11 MK12
- SP145 fits Ruger American
- SP146 fits Beretta APX
1911, Issue:11, Page:063
Big Book Catalog, Issue:71, Page:151
Big Book Catalog, Issue:71, Page:479