Buy Deluxe 3-Die Sets Redding You can order Deluxe 3-Die Sets Redding after check, compare the values and check day for shipping. Some people are want to buy Deluxe 3-Die Sets Redding in the cheap price. While the item may be priced similarly at different shops.
Deluxe 3-Die Sets Redding.
The Redding Deluxe Die Sets include the full length sizing die, standard seating die and the neck sizing die. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Guaranteed to produce ammunition that will properly fit any standard (SAAMI) chamber. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging, the come in a handy die box with a spare decapping pin, hex wrench and a place for your shellholder (sold separately).
Big Book Catalog, Issue:68, Page:534
Sinclair, Issue:5B, Page:040
Sinclair, Issue:5B, Page:041
Sinclair, Issue:5B, Page:045
Blank Slides For Gen3 Glock® 17 & 19 Stainless Brownells.
A "Blank Canvas" for Your Next Custom Pistol Masterpiece
Brownells Blank Slides for Glock® pistols come with the exterior left smooth and featureless so you can customize it exactly the way you want it. Add cocking serrations, an optic mounting slot, and cosmetic flourishes to make it entirely your own. (Yes, you will need to bring some machining skills to the table!)
Inside, the dimensions fully machined to factory dimensions, so your Brownells Blank Slide for Glock comes ready to fit a factory-spec frame and accept Gen 3 factory and aftermarket barrels and parts.
- Models for Gen3 Glock® 17 and 19 pistols
- Machined from firearm-grade 17-4 stainless steel
- Heat treated to 41-44 on the Rockwell C scale
- Comes "in-the-white" so you can apply the finish of your choice
- Includes Glock factory front and rear sight dovetails
Sometimes "off the shelf" works, sometimes you want to do it your way. When you’re ready to build your own Glock®-platform Dream Gun™, reach for a Brownells Blank Slide.
Channel liner required for these slides. Channel liners are a press fit and require a tool to install.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
Big Book Catalog, Issue:71, Page:214
Translucent Magazine For Glock® Elite Tactical Systems Group.
The ETS transparent magazines for Glock® pistols take visibility and safety to new level. Users are able to quickly determine the round count and ammo type from any viewing angle. These mags have been through rigorous testing, including several thousands of rounds without failure, using all generations and size of Glock® pistols. ETS magazines function with a variety of ammunition types & styles.
- Fully compatible with aftermarket base plates
- Reliably lock back the slide on empty magazine
- Drop free
- Easy disassembly for cleaning
- Specially designed base plate has a grip rib to aid in extraction
- Advanced Transparent Polymer
- Testing included
- Repeated drops from 8ft fully loaded without breaking or cracking
- Extreme thermal conditions ranging from -60 to 180 deg F for extended periods
- Extremely elevated UV exposure for several months to insure it will not become brittle.
- Unmatched chemical resistance including Deet, Fuels, Cleaners
- Creep resistant, your mag will not creep/spread when stored fully loaded
Big Book Catalog, Issue:71, Page:226
Ar-15/m16 Carbine Recoil Buffers Spikes Tactical.
Helps Control Felt Recoil & Bolt Bounce
Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an M4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the Spike’s logo. ST-T1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (LDTP) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. ST-T2 is filled with high-density tungsten powder (HDTP) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you stay on target in rapid-fire semi-auto operation and improves controllability in full-auto. ST-T3 gives the most aggressive reduction of felt recoil and bolt bounce with ultra-dense tungsten bar stock weights inside (5.4 oz.) for maximum recoil control in full-auto mode, suppressed weapons, or rifles that suffer from overgassing.
AR-15, Issue:11, Page:033
Big Book Catalog, Issue:71, Page:035
SPECS: Aluminum, hardcoat anodized, black. Polyurethane bumper. 3¼" (8.2cm) long. ST-T1 – 3 oz. (85g) wt.; ST-T2 - 4.1 oz. (117g) wt.; ST-T3 – 5.4 oz. (153g) wt. Fits AR-15 carbines with M4-type collapsible stock only.
Remington 700 Brn-1 Precision Chassis Brownells.
The Brownells Remington 700 (and clone) BRN-1 Chassis system is designed to provide an enhanced rifle setup for owners of a number of popular rifle actions. Manufacturerd by MDT, the chassis is developed exclusively for Brownells and is inspired by the design of MDT's LSS rifle chassis. A great option for precision long range shooters looking to upgrade their stock rifle.
The BRN-1 Chassis system is set up to accept an AR-style buffer tube, allowing access to the incredible aftermarket of AR-15 buttstock accessories. The chassis also allows for the use of AR-style pistol grips, ensuring that owners can customize their rifles in any number of ways. The chassis is constructed from 6061 aluminum and features a V-shaped bedding system that accommodates most heavy barrels. The bedding system ensures that rifle barrels are free-floated for maximum accuracy.
- Available in black and flat dark earth
- Forend features M-LOK attachment points
- Can be had in short-action and long-action setups
- Maximum recoil-lug compatibility is .350-inch
- Compatible with AICS pattern magazines
Big Book Catalog, Issue:71, Page:187
Ar-15/m16 Free Float Ras Knights Armament.
The KAC Free Float Rifle RAS has been in service with a variety of military units, proving itself as one of the most versatile and rugged handguards available. The RAS (Rail Adapter System) features full length mil-spec M1913 Picatinny rails at the 12-, 3-, 6-, and 9 o’clock positions, making it compatible with any number of rail-mounted tactical accessories. The rail free floats the barrel, allowing for consistent barrel harmonics upon firing, and thus increased accuracy potential. Includes three KAC 11 Rib Rail Panels.
This Free Float RAS requires that the rifle have a carbine or mid length gas system and a low profile gas block. Disassembly of the rifle’s gas system and removal of the factory barrel nut will be necessary. This forend uses a proprietary barrel nut that may be installed using a standard AR-15 armorer’s barrel nut wrench (sold separately). For AR-15/SR-15 based platforms only; not compatible with SR-25 variants. Installation instructions are included.
Big Book Catalog, Issue:71, Page:055
SPECS: Fits - AR15/M16 rifles. Length: 12". Free Float. Material: Aluminum. Finish: Black Anodizing.