Web Analytics

Ar 308 Raptor-Lt Charging Handle 7.62 Radian Weapons

Buy Cheap Ar 308 Raptor-Lt Charging Handle 7.62 Radian Weapons Even so, I hope until this reviews about it Ar 308 Raptor-Lt Charging Handle 7.62 Radian Weapons will always be useful. And hope I'm a section of allowing you to get a greater product. You will have a review and encounter form here. I'm hoping you will ensure and get among Ar 308 Raptor-Lt Charging Handle 7.62 Radian Weapons following read this best reviews

 

Content:

Ar 308 Raptor-Lt Charging Handle 7.62 Radian Weapons.

$66.45
The Radian Weapons AR 308 Raptor-LT Charging Handle offers AR-10 rifle owners the opportunity to upgrade their existing rifle setup with a ...

Product Description

Beefed Up Charging Handle for Your Big-Bore AR

The Radian Weapons AR 308 Raptor-LT Charging Handle offers AR-10 rifle owners the opportunity to upgrade their existing rifle setup with a charging handle that provides more flexibility and durability than standard options.

The Radian Weapons AR 308 Raptor-LT Charging Handle is constructed using 7075 aluminum, which is finished with a hard-coat anodized finish and an over-molded, fiberglass-reinforced polymer finish that adds to durability and ergonomics.

  • Can be used with most AR-10/SR25 rifles
  • Available in black, flat dark earth and gray finishes
  • Suitable for both left- and right-handed shooters

The Radian Weapons AR 308 Raptor-LT Charging Handle comes with a limited lifetime warranty and is totally designed and built in the USA.


Big Book Catalog, Issue:71, Page:038

Ar-15 Mil-Spec Bolt Carrier Group 5.56mm Left Hand Stag Arms.

$124.99
The Stag Arms Left Handed AR-15 Bolt Carrier Assembly is designed to not only work with any left handed Stag Arms AR-15 ...

Product Description

A Mil-Spec Upgrade For Left-Handed AR-15 Rifles

The Stag Arms Left Handed AR-15 Bolt Carrier Assembly is designed to not only work with any left handed Stag Arms AR-15 rifle but also any AR-15 upper receiver designed for left-handed ejection.

The manganese phosphate coated 8620 steel bolt carrier assembly is a wonderful option for your next left hand duty ready AR-15 build.

  • Manganese phosphate 8620 steel construction with a chrome lined gas key and bolt recess
  • 5.56/.223 Left-Handed Bolt
  • Includes Bolt carrier, bolt assembly, cam pin, firing pin, and firing pin retaining pin
  • M16 profile carrier with a shrouded firing pin and proper mil-spec staking of the gas key

The left-handed bolt carrier assembly from Stag Arms includes a chrome lined bolt carrier, a left handed bolt, cam pin, firing pin, firing pin retaining pin, and a properly mil-spec staked gas key.

M16 5.56 Bolt Assembly Nitride Mp Brownells.

$49.99
The Brownells M16 5.56 Complete 9310 Bolt Assembly is built to withstand heavy-duty use in both semi-auto AR-15s and full-auto M16 rifles ...

Product Description

Designed to Withstand Heavy-Duty Use in Both Full- and Semi-Autos

The Brownells M16 5.56 Complete 9310 Bolt Assembly is built to withstand heavy-duty use in both semi-auto AR-15s and full-auto M16 rifles and features construction and testing that ensures high-quality performance.

The Brownells M16 5.56 Bolt Assembly is constructed entirely from 9310 steel, which is designed to provide the elements needed to perform during rugged duty use.

  • Material quality checked with magnetic-particle inspection
  • Extractor includes spring and rubber insert
  • Optimized for use with all 5.56-NATO-based cases

The Brownells M16 5.56 Bolt Assembly includes bolt, gas rings, extractor and ejector installed.


Big Book Catalog, Issue:71, Page:011

Ar-15 Lightweight 5.56 Bolt Carrier Complete Faxon Firearms.

$248.99 - $284.99
Faxon Firearms set out to create a bolt carrier group that could live up to the GUNNER name with no compromise in ...

Product Description

Faxon Firearms set out to create a bolt carrier group that could live up to the GUNNER name with no compromise in strength or function. They set specifications that would allow no compromise:

  1. Lightest Weight Possible (8.5 Ounces Complete)
  2. MIL-SPEC Materials & Finishes or Better!
  3. Forward Assist Serrations
  4. Compatible with Dust Covers
  5. Maintains Full-Auto Trip Sear for full-auto and the new multi-stage trigger functionality
  6. Looks Amazing

Matching their barrels, they selected the QPQ method of Salt Bath Nitride for all the carriers’ components. By coating all parts, the carrier's natural slickness is increased markedly requiring less gas and pressure to operate. Further, the QPQ SBN process seals components against corrosion while making them fantastically wear resistant.

Improvements include using 9310 tool steel for the bolt, which is stronger and nitriding the assembly to increase surface hardness, decrease resistance, and have superior corrosion resistance compared to typical chrome and phosphasted bolt carrier groups. All bolts are fully MPI tested to ensure the material is sound and without defects. Bolt lugs are chamfered 45 degrees to ensure reliable action for even the highest pressure hand loads and fast lightweight actions.

Faxon Bolt Carrier Groups are Superfinished to reduce friction, increase smoothness of operation, and reduce fouling. Further, they are full-Auto rated and maintain the trip for full-auto fire control groups and new multi-stage trigger systems. Gas keys use grade 8 fasteners and are fully staked for a lifetime of service.

As a testament of our confidence, the carriers are all laser-engraved with the Faxon Shield after passing all Quality inspections.

DETAILED SPECIFICATIONS:
Bolt:

  • 9310 Tool Steel Construction (Stronger than C158)
  • Full MIL-SPEC Heat Treatment
  • Shot Peened to MIL-SPEC
  • Magnetic Particle Inspection (MPI)
  • Back of Lugs Chamfered for Reliability
  • Spring, Insert, & "Crane" O-Ring Installed
  • QPQ - Salt Bath Nitrided

 Extractor:

  • S7 Tool Steel Construction
  • Fully Heat Treated
  • Shot Peened Per MIL-SPEC
  • QPQ - Salt Bath Nitrided

 Carrier & Key:

  • Superfinished Carrier
  • Carrier: MIL-SPEC 8620 Steel Material
  • Key: 4140 Steel Material
  • Fully Heat Treated
  • Forward Assist Serrations
  • M16 (FULL-AUTO) Compatible
  • Grade 8 Fasteners
  • Fully & Properly Staked Key, Permatex Sealed
  • QPQ - Salt Bath Nitrided
  • Weight w/ Key (Not Bolt or any Pins): 6.32 Ounces

 Cam Pin:

  • 4140 Pre-Hardended Steel Material
  • QPQ - Salt Bath Nitrided


Big Book Catalog, Issue:71, Page:012

Ar-15 5.56 Low Mass Complete Bolt Carrier Groups J P Enterprises.

$335.99
Precision-machined, stainless bolt-and-carrier group features JP’s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec ...

Product Description

Precision-machined, stainless bolt-and-carrier group features JP’s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is available with choice of JPBC-2A Low Mass carriers that reduce felt recoil and increase bolt speeds slightly for enhanced rapid fire handling, or the standard JPBC-2A Full Mass carriers that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the receiver. Both the JPBC-2A carriers feature JP’s super-hard QPQ finish for maximum wear resistance and minimal friction. Extractor, firing pin, and all other components are included.


AR-15, Issue:11, Page:012
Big Book Catalog, Issue:71, Page:012

Ar-15/m16 5.56 Enhanced Bolt Completion Group J P Enterprises.

$137.99
Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon ...

Product Description

Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling.

Bolts are available individually, or in a completion group, which includes the bolt, firing pin, cam pin and firing pin retaining pin.  

Available caliber 223.


AR-15, Issue:11, Page:013
Big Book Catalog, Issue:71, Page:013
Sinclair, Issue:5B, Page:248

SPECS: SAE 9310 nickel-chromium-molybdenum steel, black nitrate. Fully assembled with extractor, gas rings, ejector, pins, and springs installed.

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

We Have Recommendations for You

Take 30% off when you spend $150 or more with code Autima11